Click image to view full size image
High Temperature Heat Pump With 80 degree Hot Water And High COP
Specifications:
| Parameters | MG-050KFGRS |
| Body size(W*D*H) | 1110*490*1260 |
| Compressor | Copeland |
| Refrigerant | R134A |
| Power supply | 380V/50Hz |
| Condenser | Efficient tank |
| Thermostatic expansion valve | Danfoss |
| AC contactor | (220V-18A) |
| Controller | Dual system |
| High-voltage switch | 2.4/3.0MPa |
| Power line connect with unit | 3*4mm2+2*2.5mm2 |
| Heating capacity (kW) | 13.8 |
| Input power (kW) | 5.4 |
| Rated current (A) | 13 |
| COP (Coefficient of Performance) | 2.56 |
| Production capacity (L/H) | 198 |
| Rated outlet hot water temperature () | 75 |
| Highest outlet hot water temperature() | 80 |
| IP Grade (Level of protection) | IPX4 |
| Anti-electric shock Rate | I |
| Noise (dB(A)) | ≤58 |
| Net weight/Gross weight(kg) | 145/155 |
| Diameter of pipe (mm) | DN25 |
Description
1. Environmental friendly and safe
Electric parts and water system is completely cut off, ensuring security water use, no pollution to the atmosphere and free of greenhouse effect and it is the safest water heater
2. Wide climatic zone adaptability
Our heat pumps with special designing possess better climatic adaptability, can work from -25 to 43.
3. Energy-saving
Heat pump water heater is a high efficient transferring heating equipment which is driven by electricity. The operating cost is only 1/4 of electric water heater, 1/3 of gas water heater.
4. Automatic intelligent control system
Adopting intelligent computerized automatic control system, no manual cost, easy to operate, convenient, make heat pump work safely and reliably.<
Commercial Heating And Cooling High Temperature Hot Water Heat Pump COP 13.8 KW
